Everything You Need to Know About Wemo Light Switch not Connecting to Wi-Fi
It is the best time to install a smart lighting system in your home. Whether you want to install light bulbs, switches, or smart switches, Wemo offers a wide selection of lighting products.
Every smart home is incomplete without a perfect lighting system. All you need to do is to complete the setup with the Google Home and the Alexa voice control assistance and enjoy controlling the device from any place using the mobile device.
Once the Wemo lights set up is complete you can easily control the color, mode, brightness, and much more just at your fingertips. However, it is also important to connect the Wemo lights with a stable wi-fi network to avoid issues.
If the network is unstable then you are most likely to experience a Wemo light switch not connecting to Wi-Fi. If this is the problem then you must check the network connection.
In this blog, we have covered in detail the solutions that you need to follow to resolve the problem with the Wemo light switch. However, if the problem persists then you must get in touch with the technical support team for help and assistance.
Quick Fixes to Resolve Wemo Light Switch not Connecting to Wi-Fi Issue
For the Wemo light switch to work efficiently it must be connected to a stable network. You can easily set up the Wemo devices using the app and then control the switch and the lighting system on your fingertips.
However, if you are facing a problem with the Wemo light switch then here are the solutions that you need to follow. However, if you are in hurry and need an immediate solution then get in touch with the technical support team for help and assistance.
Check the Setup of the Wemo Device
For the Wemo light switch to work properly it must be connected to the wi-fi network otherwise you are most likely to experience an issue.
Make sure to connect the Wemo device with the network and then turn it on. Now, you can create a network with the Wemo device and then complete the configuration.
Use the Wemo App to Configure the Smart Light Switch
Open the Wemo app and then create an account. Choose the device that you want to configure. Follow the steps on the screen as it is to connect the device to the Wemo network.
You can enter the username and password while connecting the network. However, if you are facing issues like the Wemo light switch not connecting to wi-fi then check the setup.
Check the Wi-Fi Light Status Indicator
It is important to confirm whether or not the problem is with the wi-fi network or there is another issue. You can check the LED indicator on the Wemo light switch to see if the problem is with the wi-fi network or not. Here are a few things that you need to check.
- If the LED indicator is green and flickering then it means that the Wemo light switch is starting the connection or the firmware update is going.
- If the wi-fi LED indicator is green and stable and then turns off then it means the Wemo light switch has established a stable network connection.
- If the Wemo light switch indicator is amber and blinking then it is clear the problem is because the Wemo light switch not connecting to wi-fi. To resolve this problem, try power cycling the wi-fi router.
Factory Reset the Wemo Light Switch
If troubleshooting Wemo lights are not able to resolve the problem like Wemo light switch not connecting to wi-fi then you will have to reset it.
However, before performing a reset we recommend getting in touch with the technical support team as the reset will restore the default settings.
- Press the reset button and then release it.
- Press the reset button for 10 seconds and then release it.
- Check the LED light on the Wemo light switch as it must start blinking.
These are some of the solutions that can help you fix the problem with the Wemo light switch. However, sometimes you may not be able to resolve the issue simply by following these methods.
In such a case you need to get in touch with the technical support team for fixing the Wemo light switch not connecting to the wi-fi problem.